24V Wind And Solar Hybrid Charge Controller 1KW Wind + 600W Solar
This wind and solar hybrid charge controller is designed for 24V wind solar hybrid generation station with 1KW wind generator and 600W solar panel
1. Features
1.1 Basic Functions
- Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization
There is internal resistance in Wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power
- Protect wind generator from over-revolution speed, over-voltage and over-current
Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the set ones, PWM intelligent unloading will start automatically. That protect wind generator
- Intelligent limiting of batteries max current
Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controller could calculate the maximum charging current. Then batteries will be protected
- function of manual brake
- Wind charging manual switch
- Solar charging manual switch
1.2 Optional Function
- USB function
- RS232 interface
- RS485 interface
- Anemometer function
2. Parameters
| Model |
YQHCN1-06/24 |
| Rated system voltage |
24V |
| Rated wind generator power |
1KW |
| Rated solar panel power |
600W |
| Battery low voltage disconnect |
20.4V |
| Battery low voltage reconnect |
23.0V |
| Equalize charging voltage (absorption) |
29.4V |
| Equalize charging recovery voltage |
26.4V |
| Float charging voltage |
27.0V |
| Wind dumpload rotate speed |
500R |
| Wind pole logarithm |
10D |
| Wind starting charging voltage |
10V |
| Wind dumpload voltage |
100V |
| Dump load control model |
Over rotate speed limiting, over voltage limiting
Over current limiting, PWM
|
| Wind charging technology |
PWM |
| Solar charging technology |
PWM |
| Display |
LCD |
| Display content |
Battery: voltage, charging current, battery power
Wind: voltage, charging current, rotate speed,
output current&power
Solar: voltage, charging current
System: status, generation power, error code
|
| Ambient temperature |
-20℃~55℃ |
| Humidity |
35~85%, non-condensing |
| Standy by consumption |
≤3W |
| Protection type |
Battery: over-discharge, over-charge, anti-reverse connection
Wind: Over rotate speed, over voltage, over current
|
| Controller size |
423*450*175mm |
| N.W |
16KG |
| Packing size |
510*250*545mm |
| G.W |
18KG |
| Optional function |
RS232, RS485, USB, Anemometer |
| Warranty |
2 years |
- Remark 1: the parameters are marked in Red color can be adjusted by users according to different requirement of different battery
- Remark 2: This model wind solar hybrid controller suitable for off grid wind solar hybrid system with 3000W wind generator and 900W solar panel, if you have different power of solar panel and wind generator, please feel free to contact us for right model.
3. About the dump load
Because the wind generator power not exceed 5KW, so the dump load is inside the controller
4. Application
Off grid wind solar hybrid system
Independent Wind generation system
