96V 1.5KW 2KW 3KW 5KW Intelligent MPPT Wind Solar Hybrid Charge Controller
The intelligent MPPT wind solar hybrid charge controller is special designed for big capacity off-grid wind solar hybrid generation system. It integrats boost and buck technology together so it can work with almost kind of wind generator. It can control wind generator and solar panel charging battery safe and efficiency. Appearance is elegant, operations are easy.
1. Features
1.1 Basic Functions
- Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization
There is internal resistance in Wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power
- Protect wind generator from over-revolution speed, over-voltage and over-current
Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the set ones, PWM intelligent unloading will start automatically. That protect wind generator
- Intelligent limiting of batteries max current
Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controller could calculate the maximum charging current. Then batteries will be protected
- Function of manual brake
- Wind charging manual switch
- Solar charging manual switch
1.2 Optional Function
- USB function
- RS232 interface
- RS485 interface
- Anemometer function
2. Parameters
| Model |
YQHCM
1.5-05/96
|
YQHCM
2-06/96
|
YQHCM
3-09/96
|
YQHCM
5-1.5/96
|
| Rated system voltage |
96V |
| Rated wind generator power |
1500W |
2000W |
3000W |
5000W |
| Rated solar panel power |
500W |
600W |
900W |
1500W |
| Battery low voltage disconnect |
80V |
| Battery low voltage reconnect |
92V |
| Equalize charging voltage (absorption) |
117V |
| Equalize charging recovery voltage |
105V |
| Float charging voltage |
108V |
| Wind dumpload rotate speed |
500R |
| Wind pole logarithm |
10D |
| Wind starting charging voltage |
40V |
| Wind dumpload voltage |
120V |
| Dump load control model |
Over rotate speed limiting, over voltage limiting Over current limiting, PWM
|
| Wind charging technology |
MPPT (Boost&Buck) |
| Solar charging technology |
PWM |
| Display |
LCD |
| Display content |
Battery: voltage, charging current, battery power
Wind: voltage, charging current, rotate speed, output current&power
Solar: voltage, charging current
System: status, generation power, error code
|
| Ambient temperature |
-20℃~55℃ |
| Humidity |
35~85%, non-condensing |
| Standy by consumption |
≤3W |
| Protection type |
Battery: over-discharge, over-charge, anti-reverse connection
Wind: Over rotate speed, over voltage, over current
|
| Controller size |
423*450*175mm |
| N.W |
16KG |
| Packing size |
510*250*545mm |
| G.W |
18KG |
| Optional function |
RS232, RS485, USB, Anemometer |
| Warranty |
2 years |
- Remark 1: The parameters are marked in Red color can be adjusted by users according to different requirement of different battery
- Remark 2: If you have different power of solar panel and wind generator, please contact us for right model.
3. About the dumpload
If the wind generator power ≥ 5KW, the dump load will be outside of the controller, otherwise inside the controller. The following is the independent dump load outside of wind solar hybrid charge controller
4. Dimension
5. Application
Off grid wind solar hybrid system
Independent Wind generation system
