12V 300W Wind Solar Hybrid Controller With Boost Constant Current Output
It is a PWM model wind solar hybrid controller. It with boost constant current output which is suitabel to work with LED or other device need constant current.
1. Features
- Protect wind generator from over-current
If the battery is dead, the controller also can protect the wind turbine from over -speed
If he battery is dead, the controller can restart itself by sunshine
- Intelligent limiting of batteries max current
- Function of manual brake
- Wind charging manual switch
- Solar charging manual switch
- DC output manual switch
- DC output has 4 kind of diversified working models
- DC output with boost constant current
- RS232/RS485 interface (optional)
2. Parameters
| Model |
YQHLNR02-01/12
|
YQHLNR02-02/12
|
YQHLNR03-01/12
|
YQHLNR03-02/12 |
| Rated system voltage |
12V |
| Rated wind generator power |
200W |
200W |
300W |
300W |
| Rated solar panel power |
100W |
200W |
100W |
200W |
| Max. input voltage of solar panel |
80V |
| Battery low voltage disconnect |
10.2V |
| Battery low voltage reconnect |
11.5V |
| Equalize charging voltage |
14.7V |
| Equalize charging recovery voltage |
13.2V |
| Float charging voltage |
13.5V |
| Over load voltage |
17.5V |
| Over load recovery voltage |
15.0V |
| Wind dumpload rotate speed |
500R |
| Wind pole logarithm |
10D |
| Wind starting charging voltage |
10V |
| Wind dumpload voltage |
80V |
| Max. output power |
50W |
| 1st output working model |
PV control (light on: 6V, light off: 6V) (Adjustable) |
| Dump load control model |
Over rotate speed limiting, over voltage limiting, Over current limiting, PWM
|
| Wind charging technology |
PWM |
| Solar charging technology |
PWM |
| Display |
LCD |
| Display content |
Battery: voltage, charging current, battery power
Wind: voltage, charging current, rotate speed, output current&power
Solar: voltage, charging current
System: status, generation power, error code
|
| Ambient temperature |
-20℃~55℃ |
| Humidity |
35~85%, non-condensing |
| Standy by consumption |
≤1.2W |
| Protection type |
Battery: over-discharge, over-charge, anti-reverse connection
Wind: Over rotate speed, over voltage, over current
|
| Controller size |
162*148*85mm |
| N.W |
1.8KG |
| Optional function |
RJ45 to RS232 or RJ45 to RS485 |
| Warranty |
2 years |
- Remark 1: The parameters are marked in Red color can be adjusted by users according to different requirement of different battery
- Remark 2: This kind wind solar hybrid controller is designed for small power off grid wind solar hybrid generation system or independent wind generation system.
3. Application
Off grid wind solar hybrid system
Independent wind generation system
Streetlight system
Monitoring system
